Nope
Also, what positions would you recommend for making the SBD-T and AichiVal-T seaplanes? I addTemplated on 4 LCVPFloaters, but it sits nose up, sort of lopsided, and engine too far under to take off.
| Battlefield Modding Tutorials BFMODS https://battlefieldmodding.com/ssm/phpBB3/ |
|
| Midway Crashing with New Engines https://battlefieldmodding.com/ssm/phpBB3/viewtopic.php?f=3&t=4556 |
Page 1 of 2 |
| Author: | Sheppard [ Fri Dec 26, 2008 6:59 pm ] |
| Post subject: | Midway Crashing with New Engines |
| Author: | freddy [ Fri Dec 26, 2008 7:59 pm ] |
| Post subject: | Re: Midway Crashing with New Engines |
unfortunately creating engines doesn´t work in all maps for some reason. Coral Sea and iwo Jima works with own engines and jetpack, Market Garden doesn´t. for example. but it should work to use the Torpedo_Engine, make sure you have it over the water surface if you convert it to a plane engine and vice versa. |
|
| Author: | Sheppard [ Fri Dec 26, 2008 8:00 pm ] |
| Post subject: | Re: Midway Crashing with New Engines |
Well I had jetpack mod on Market and Midway for some time with no problem...but my server is wierd, as in it won't run omaha or BoB modded or not. Also for the torpedo_engine on the lcvp, I have it position 0/0/0 0/0/0, and I'm very bad at positioning things in vehicles, what number should I change and by how much? |
|
| Author: | WhatThe [ Sat Dec 27, 2008 8:26 pm ] |
| Post subject: | Re: Midway Crashing with New Engines |
lower the first middle number by however much you want (e.g -1 or lower) |
|
| Author: | Sheppard [ Sat Dec 27, 2008 8:32 pm ] |
| Post subject: | Re: Midway Crashing with New Engines |
Wait, that confuses me, shouldn't it go up? I set it to a plane engine so it will work above water, problem is that the lcvp sits too low in the water for it to work. It works with the daihatsu, I assume because it is higher in the water. EDIT: I tried adjusting the middle number both ways. The engine works now, but it seems to be in the back of the lcvp. When the boat pitches forward, the turbo works. When I adjusted it to what you said, when the boat pitches backward, the turbo works. It's not changing the height, its changing the position from front to back. |
|
| Author: | Sheppard [ Sun Dec 28, 2008 7:57 pm ] |
| Post subject: | Re: Midway Crashing with New Engines |
So, no help? |
|
| Author: | WhatThe [ Mon Dec 29, 2008 4:02 am ] |
| Post subject: | Re: Midway Crashing with New Engines |
| Author: | Sheppard [ Thu Jan 01, 2009 9:31 pm ] |
| Post subject: | Re: Midway Crashing with New Engines |
Nope Also, what positions would you recommend for making the SBD-T and AichiVal-T seaplanes? I addTemplated on 4 LCVPFloaters, but it sits nose up, sort of lopsided, and engine too far under to take off. |
|
| Page 1 of 2 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|