Battlefield Modding Tutorials BFMODS

Looks like the Jet pack i spawning on its side with rotor perpendicular to the ground.

Still bouncing. Ill look at seat position, and all other positions to line it up, but im nearly done with it.

The rotor for the jetpack is in the correct position.

The 6 tires under the jetpack for landing purposes are in the correct position.

However the dummy pilot is lying on the ground on his side. Any ideas on how to change the direction of the pilot so he stands up instead of laying on his side.

So the jetpack still spins around, would the tail engine be causing the spin?

EDIT

Ok i now have the wheels of the jetpack on the ground, the dummy standing upright with the rotor blade above his head.

Problems remaining are:

- the Jetpack still spins unconsciously in circles
- without collision on the wheels, the wheels sink through the ground and jetpack sits on ground (rolling around), however, it doesnt bounce all over the place. Something in the wheels looks like it is causing the bouncing. Wheels are the ve_hullwheel_m1 mesh used in both 42 and BFV.
- Is the tail rotor meant to stop the spinning? or is this a function of having the wrong material somewhere?

wait. you say that without collision the wheel goes through the ground. well DUH. are you making it have no collision or are you saying that you can't make it have collision?

_________________

tail rotors stop the spinning in real life so I would assume thats what they do (they also provide a mid-air twisting effect if you lower/raise power to it